Using Smart Cards in Windows Virtual PC

Smart cards are routinely used in many organizations for login, digital signing, encrypting data or even accessing some applications. A key reason why you may need to use a smartcard reader in a Virtual Machine (VM) on Windows® 7 is application compatibility. For example, if you have a web-based application which requires Internet Explorer® 6, you may use it in Windows XP Mode and login to that application using a smartcard reader. You can use smartcards in any VM created using Windows Virtual PC (WVPC) on Windows 7, just as you use smartcards on Windows 7. There are many types of USB smartcards in use, made by different vendors. Each such device comes with its own device driver software, which needs to be installed in the OS on which the smartcard reader is being used. Smart Cards can be shared between the host OS (Windows 7) and the VM, or can be assigned exclusively to VMs. In this article, we will go over the use of smartcards in WVPC.

Assigning Smart Cards to the VM

Smart cards are shared between the host and the VM by default when Integration Features (IFs) are installed in the VM. You can disable this setting by unchecking the ‘Smartcards’ check-box in the Settings of the VM under ‘Integration features’ as below (Figure 1). Then, the smartcard cannot be used in the VM until the setting is enabled again.

Fig 1

Figure 1: Settings for Smart Card Sharing

In Integration Features enabled mode of WVPC, Microsoft’s Remote desktops Protocol (RDP) is used to share the devices between the VM and Windows 7 host, as explained in an earlier article. RDP does not allow the use of a smart card when explicitly assigned to the Virtual Machine. Further details about this can be found in https://www.microsoft.com/downloads/details.aspx?FamilyID=ac201438-3317-44d3-9638-07625fe397b9&displaylang=en. Accordingly, the option to assign a smart card is disabled in USB Toolbar or Manage USB Devices as shown below (Fig. 2).

Fig 2

Figure 2: Smart Card Sharing is disabled in Integration Features enabled mode

USB Smart card readers can be exclusively assigned to a Virtual machine in IF disabled mode only. Smart cards drivers need to be installed in Windows 7 as well as the Virtual machine to get smart cards working in shared mode. To install smart card drivers or to assign a smartcard exclusively to the VM, user needs to follow the below steps:

  1. Disable Integration Features (IF) by going to Virtual Machine Toolbar and then selecting Disable Integration features under Tools option as shown below (Fig. 3):

Fig 3

Figure 3: Disabling Integration Features

    2. Assign the smart card to the VM using USB menu present in the VM toolbar (Fig. 4):

Fig 4

Figure 4: Assigning USB Smart Card Reader in Integration Features Disabled Mode

   3. Install the required drivers in the VM. For example, go to Device Manager, select the device and use “Update Driver Software” and then provide the required drivers.

   4. Release the device using USB menu same as above in Step 2.

   5. Enable IFs again using the toolbar and then use the smart card.

Smart Card Scenarios:

Two common scenarios requiring the use of a smart card in an organization are login to a VM and connecting to an office network from a VM.

Using Smart card for login to a VM

In an organization where users are required to login to a VM, they can join the VM to the domain and use smart cards to login. During the VM startup, when the user is prompted to enter user credentials, they can enter smart card credentials (Figure 5).

Fig 5

Figure 5: Credential UI prompt

On providing their credentials, user needs to re-enter the same in Windows XP Mode VM as below (Figure 6).

Fig 6

Figure 6: Re-Enter PIN in the Virtual Machine

When the user is logging in to Windows XP Mode, s/he is actually establishing a ‘remote’ session between the Windows 7 ‘client’ and the ‘Windows XP Mode’ RDP ‘server’, as explained in an earlier blog. The second prompt is required to authenticate the RDP session. Smart card credentials are secure and hence cannot be saved for subsequent logins. As such, the user needs to provide smart card credentials each time he/she logs on to the VM.

Logging in to a virtual application running in Windows XP Mode works the same way as above, when you launch a virtual application which requires authentication using a smartcard.

Secure Mode Login

Windows 7 provides an option to enable secure mode login for the machines. The advantage of this policy setting is that it requires the user to enter Microsoft Windows credentials using a trusted path, to prevent a Trojan horse or other types of malicious code from stealing the user’s Windows credentials. WVPC uses this setting to honor the same when the users log on to a VM as well. The Credential UI prompt (shown in Fig. 1) is not shown when this setting is enabled. To enable this setting, open ‘Group Policy editor’ in Windows 7. The setting (Figure 7) is called “Require trusted path for credential entry” present in the Local Group Policy editor under Computer Configuration -> Administrative Templates -> Windows Components -> Credential User Interface.

Fig 7

Figure 7: Group Policy option for Secure Mode Login

Enabling this setting will ask for the Credentials inside the VM login screen only. Also, the setting is applied across all the VMs on the machine and the remote desktop connection to any other machine as well.

Login in Offline Scenario

Please note that this section is relevant only if you create your own VM with your own copy of an Operating System other than Windows XP®.

In offline scenarios, such as working from home or a remote location without network connectivity, a domain controller (server) to authenticate the credentials is not available because the user cannot access the Corpnet. In such cases, smart card credentials are stored in local cache of Windows Vista or Windows 7, if the machine was used at least once prior to the offline (remote) use. If not, the user cannot login using a smart card. To login to a Windows Vista or Windows 7 VM in such scenarios, either the secure mode needs to be enabled (as above) or the user needs to enable a VMC setting tag (Do_Not_Prompt_Creds) for the VM as shown below. Enabling this setting will bypass Credentials UI prompt and directly take the user to the VM login screen.

The setting is present under the ui_options within the virtual machine configuration file (.vmc file, which can be found under %LocalAppData%l\Microsoft\Windows Virtual PC\Virtual Machines\), as a boolean value. Setting it to ‘true’ will enable the setting, as below:

 <ui_options>
        <do_not_prompt_creds type="boolean">true</do_not_prompt_creds>
</ui_options>

This setting is not created by default and there is no direct User Interface to set it. The user needs to make a COM call to enable/disable this setting, as below. This is a per VM setting, which means it needs to be set in every VM separately. Please note that a VM running Windows XP as the guest OS, such as the Windows XP Mode, does not have this issue, by design.

An example script to enable this setting is shown below:

 ' Get the VPC Object
Set objVPC = CreateObject("VirtualPC.Application")

' Get the Virtual Machine Object
' Change the Name as appropriate
Set objVM = objVPC.FindVirtualMachine("VMNAME")

' Enable the setting
objVM.SetConfigurationValue "ui_options/do_not_prompt_creds", true

 

Similarly, another example script to disable this setting is shown below:

 ' Get the VPC Object
Set objVPC = CreateObject("VirtualPC.Application")

' Get the Virtual Machine Object
' Change the Name as appropriate
Set objVM = objVPC.FindVirtualMachine("VMNAME")

' Disable the setting
objVM.SetConfigurationValue "ui_options/do_not_prompt_creds", false

While connecting to the Corpnet from home, Virtual Private Network (VPN) typically is used, to access the corp resources. In this case, if you need to exclusively assign the smartcard to the VM, it is recommended that you use the Bridged mode of networking only. Using NAT (shared networking) configuration for VPN access would not work in WVPC.

Hot fixes for Using Smart Card in a VM

Base Smart Card Cryptographic Service Provider (Base CSP) allows smart card vendors to more easily enable their smart cards on Windows with a lightweight proprietary card module instead of a full proprietary CSP. The user sees a warning message if it is not installed in some scenarios as shown below (Figure 8):

Fig 8

Figure 8: Smart Card Error

To overcome this, install the base CSP applicable for Windows XP from https://www.microsoft.com/downloads/details.aspx?FamilyID=e8095fd5-c7e5-4bee-9577-2ea6b45b41c6&displaylang=en

Conclusion

Using smart cards with VMs can be done by just making sure that appropriate drivers-hotfixes are installed in the Virtual Machine. Smartcards can be used for login to the VM or virtual applications in Windows XP Mode, and VPN access to the corporate network. We hope this information is useful to you.  Check out Windows XP Mode RTM Build today, and let us know what you think, either via the comments section here, or sharing your feedback on the WVPC and Windows XP Mode Forum on Technet here.

Technorati Tags: Windows 7,Windows Virtual PC,Windows XP Mode,Application Compatibility,Windows Upgrade,VPC,VHD,VM,Virtual Machine,Virtualization,Smartcard

Rahul Rajwanshi

SDET

Microsoft Virtualization Team