Broadcom Net Extreme II Driver deployment in MDT 2010

1. Configure your task sequence to copy the driver to local HDD. Technorati Tags: Broadcom in MDT2010,Broadcom NetExtreme II xcopy Source destination /E /Q Command Line : Xcopy %DEPLOYROOT%\$OEM$\All %DESTINATIONLOGICALDRIVE%\MININT\ /E /Q   2. Configure FirstLogonCommand in Unattended.xml ( in 2008 ) or GUIRunOnce in Unattended.txt in 2003 to run the setup package. In our…

0

Identify Unknown Device

The way to identify the right driver is fairly simple. 1. First Identify the right PNP_ID (DEV_ID) of the device. If you are already inside Windows, then go to device manager–>properties–> Details –>Under Property select "Hardware Ids" and Make a note of VEN_XXXX and DEV_XXXX 2. With the identified VEN and DEV ID’s locate the…

0

Configure Microsoft Synthetic drivers in MDT 2008

Configure Microsoft Synthetic drivers in MDT 2008 Extract the drivers from VMGuest.ISO. Add the extracted drivers using the Driver Wizard Page and create a driver group called Hyper-V. Once it’s imported, check the proper architecture for the driver. Now Go to Deployment point, Select your Network deploy point right click Properties –> Driver Group Uncheck…

0

Working with Legacy NIC on Hyper-V with MDT

Deploying Server 2003 with MDT 2008 on Hyper-V server. Issue : You will find machine boot fine with PE 2.0 and connect to the deploy share but after deploying the 2003 OS. At the first boot you will find the machine does not connect back to the deployshare. Resolve : Windows 2003 does not hold…

0

Find driver supported architecture before importing to MDT2010

(Refer my new posting for Broadcom NX2 deployment via MDT2010 Broadcom Net Extreme II Driver deployment in MDT 2010) Important Note : MDT 2010 Update 1 Release would automatically detect the right architecture. Below article applicable only for MDT 2010 RTM For example if you are downloading driver file http://www.broadcom.com/support/ethernet_nic/netxtremeii.php. Make sure you get the right architecture…

0