NAP 802.1x Enforcement – Switches we’ve tested w/NAP

Hi everyone!

As you may have heard, we have shown a rack filled up with switches to demonstrate NAP 802.1x enforcement interoperability at RSA and Interop 2007.

Apparently, there are lots of NAPPERS out there who want to know exact models of switches used in our demos. Well, your wish is our command!

Vendor	Model	Link
Enterasys Networks	2G4072-52	https://www.enterasys.com/nap
D-Link	DES-3828	https://www.dlink.com
Nortel Networks	5520-24T-PWR	https://www.nortel.com
ProCurve Networking / HP	3500yl-24G-PWR	https://www.procurve.com
Foundry Networks	FGS624P	https://www.foundrynet.com
Extreme Networks	X450-24t	https://www.extremenetworks.com
Aruba Networks	800	https://www.arubanetworks.com
Cisco Systems	3560	https://www.cisco.com
Alaxala Networks	AX2400S / AX3600S	https://www.alaxala.com
Meru Networks	AP200 / MC1000	https://www.merunetworks.com

You can use this 1x step-by-step document to setup all the switches above. Works great!

If you have any question about this demo setup, feel free to email me or discuss it in our NAP Forum!

Regards,

Mr. Choe

Additional resources