HP 6910p notebook received – first impressions

HP6910p Santa keeps bringing me toys and it isn't even Christmas yet.  This time I received the long awaited HP 6910p notebook computer.  I like to do first impression posts pretty quickly on new hardware because first impressions count, and I forget about the out of box experience later.

In the spirit of transparency you should know that HP is sponsoring my team this fiscal year although the year is half over and we just got the machine.  I don't know what that means, but I'm guessing we'll have the HP 6910p long after the fiscal year closes on June 30th.  I also have no idea why the 6910p was chosen.  I would have picked a different machine but since I wasn't asked, I'll just accept what I was given and assume HP had a good reason.  AT&T is also sponsoring our HSDPA cell module data connections in the unit.  Thanks HP and ATT.  We appreciate the goodies.  Now for my initial thoughts on the machine.

The Hardware

I like the form factor.  The 6910p is a 14.1" widescreen and the LCD we have runs a native resolution of 1440x900.  This unit is going to make a nice travel partner.  It isn't the slickest until on the market from a size perspective, but the dimensions are pretty nice.

The machines we received are full featured.  It has the Intel PM965 "Santa Rosa" chipset, the Intel Core 2 Duo T7500 processor, 4GB of RAM, 120GB 7200rpm SATA primary drive, ATI Mobility Radeon X2300 discrete video processor with 128MB of memory, 3 USB ports, IEEE 1394 "FireWire" port, Intel 82566MM GigE Ethernet, Intel 4965AGN wireless, Sierra Wireless HSDPA cell wireless, etc.  In short, pretty much all the bells and whistles.

Included with my package were a couple of Multibay hard drives.  Those hard drives allow me to have two spindles in the unit which is a core requirement for my team when running the usual array of virtual machine demos.  Unfortunately, the drives that came were 80GB 5400rpm PATA drives.  What am I supposed to do with them?  They aren't going to cut it so I pulled a 100GB 7200rpm PATA drive from a USB enclosure I have and replaced one of the 80GB drives with it.  That wasn't a trivial chore.  A NASA engineer must have designed the Multibay hard drive enclosure because it took some time to disassemble it, replace the drive, and reassemble it.  Fun.

The LCD screen has a matte finish and is plenty bright.  I've been running 1680x1050 or higher resolutions on my other 15.4" laptops so going back to 1440x900 seemed like a step backwards, but you get used to it pretty quickly.  The ATI Catalyst drivers work on Windows Vista and Windows Server 2008 RC1.  We'll get to my units long term role but this is probably a good hint.

The 6910p includes an integrated smart card reader (I haven't tried yet), a PCMCIA card bus slot, S-Video out, VGA out, audio connections and a SD slot for memory cards.  We received the standard battery (from what I can tell) but haven't tested battery life.  I normally run plugged in on high performance so I don't worry too much about life.

One thing I would have liked in this machine is an ExpressCard slot.  HP now makes other business notebooks with an ExpressCard slot so if that is important to you, you might want to consider one of those models.

The Software

I was pretty pleasantly surprised with the first boot experience.  On the first boot, you are given the option of installing either the 32bit or 64bit version of Windows Vista Business.  That is soo cool.  I picked the x64 version and let the install proceed.  The install takes a pretty long time.  The installation routine partitions the primary drive into several partitions, installs the software, then takes a snapshot of everything for later recovery if needed.  I thought that was nicely done although it takes over an hour for the process to complete.  After logging in and checking a few things out, I did my usual best practice of creating the disk recovery set (which HP supplies a program for).  I created the factory image recovery disk set which takes either 9 CDs, 2 DVDs or a single dual layer DVD.  After it completed, I booted the disk set to see if it looked like it would work, then flattened the box.

Why would I flatten the machine?

Simple, Hyper-V baby!!!  As you might suspect from the previous paragraph, I did not spend any time looking at the Windows Vista implementation provided for any significant period of time.  It looked like the usual OEM stuff but I did notice it was not cluttered with a bunch of software I would not need.  I did see a firewall product, a lite version of Roxio 9, a DVD playback product, etc.  It looked like a well thought out mix.  You know, business stuff. 

But I need a server demo machine and wanted to see if this little bad boy would run Windows Server 2008 RC1 with the Hyper-V virtualization stack.  I was not disappointed.  Windows Server 2008 RC1 setup allowed me to nuke the partitions, re-partition the drive and install the Enterprise edition without issue.  I turned on wireless support, audio support, installed the ATI Catalyst video drivers, etc.  I also installed the ATT cell module software and confirmed it works with Windows Server 2008 Enterprise x64.  It does.  The 6910p is running Windows Server 2008 RC1 x64 with Hyper-V nearly as fast as my Lenovo ThinkPad T61p.  This is a really good sign.  I loaded up a massive MOSS virtual machine and confirmed it ran well enough.  It did.


Looks like I have a nice little workhorse machine.  I need another primary drive so I can easily swap operating systems if needed.  I am also investigating the true capabilities of the Multibay.  It would appear that although I received a PATA hard drive Multibay caddy, this unit also supports SATA drives in the Multibay.  Time will tell on that.

When I receive another primary drive, I'll go back and install some other operating systems and try them out.  Until then, I plan to keep on using it as a Windows Server 2008 RC1 demo server. Cheers.

[UPDATE for 1/19/2008]  I finally got around to installing the x64 version of Windows Vista Ultimate on this machine so I thought I would offer some additional information.  First, it appears there is an issue with the Intel AMT drivers, service and software.  On my machine it hangs the Explorer shell at login.  It eventually gets past whatever the error is but it isn't the best experience.  After removing the software in add/remove programs, it plays nice.  Something for HP and Intel to look into.  Maybe us as well.

Second, I don't really like some of the hardware design aspects.  There are intake/exhaust areas on the bottom.  This means if you plan to use it on your lap, you'll definitely want to use a Targus Coolpad or something so that the machine can breath properly.

Third, it's a little noisy.  It isn't terrible but it is noticeable.  I am running default power and fan settings in the BIOS so I may experiment with that over time to see if I can reduce some of the noise. 

To summarize, it runs Windows Vista x64 and Windows Server 2008 x64 fast and clean as expected.  It's smaller and lighter than my Lenovo ThinkPad T61p so it's going to make it hard to decide what to take on the road with me.  I would imagine it'll get the nod when I have to take two machines.  Since I'm running x64 versions of the OS, I did not spend any time looking at the factory 32bit image that it shipped with.  Enjoy.

Comments (8)
  1. Peder Vendelbo Mikkelsen says:

    The reason I flatten a machine is to avoid badly written software from the manufacturer and to really know what software is on the machine:


    How do you remember to update "HP Quick Launch Buttons" if you do a restore from the disk recovery set in 6 months?

  2. Keith Combs says:

    WOW.  That’s ugly, but it could happen to any OEM.  Regarding your last question, I don’t.  Usually when a sponsored machine is returned, I simply use the factory disk set and put it back to the state it was in when I received it.  I never use the disk set for any other reason but you raise an interesting point.  18 months could have passed and most likely a non trivial number of security patches.

    I guess I could let the update process run and bring it up to date, but who is going to do that for a machine being returned?

  3. Chris says:

    I know that several Microsoft folks use the Acer Ferrari 4000 and I was wondering if you know how well the Win2k8 Hyper-V works with this laptop…  Any idea?

  4. Peder Vendelbo Mikkelsen says:

    Chris wrote:

    > I know that several Microsoft folks use the

    > Acer Ferrari 4000 and I was wondering if you

    > know how well the Win2k8 Hyper-V works with

    > this laptop…  Any idea?

    I dont work for Microsoft, but that wont stop me from trying to answering your question.

    I think Hyper-V doesnt work on your Notebook, it doesnt work on Acer Ferrari 1000 and 5000 series machines either.

    I have an Acer Aspire 9300 with AMD Turion 64 X2 with F2 stepping (CPU-Z from http://www.cpuid.com can tell you about your stepping-level) where it doesnt work.

    AMD Turion-based machines can be made to work, but it requires that Acer include some kind of software-support in the BIOS if you have a stepping lower than F3.

    See more here on Mike Kolitz blog:


    It does work on my Lenovo T60 from work because it always had the supporting software in the BIOS.

    Even though we probably could convince Acer to create a new BIOS, i dont think we would be able to convince them to create 64-bit WHQL-certified drivers.

    You could install W2K8 in Server Core mode and run Virtual Server 2005 on it, read more on Alves Arlindos blog:


    Virtual Server doesnt support 64-bit virtual machines so you wont be able to install W2K8.

  5. Keith Combs says:

    Chris, are you asking how well Hyper-V runs with the Ferrari 4000 or the HP 6910p?  It runs great with the 6910p.  I’ve been running it off and on for a week and haven’t seen any issues with my 6910p.  I’m not really working with the machine very much right now, but that begins big time on 1/2/2008.

  6. Mat says:

    You mention some cooling issues, to be more specific about the air intake.

    I just want to point out that as far as i know there is a secondary air intake, at the keyboard. to realise that yourself just place your hand over "asd" keys, you might feel air being sucked in.

  7. Ed Kaye says:

    I, too, just got one of these new laptops.  I am having a slight problem.  I use the system attached to HPs docking station with 2 HP L1965 monitors.  The problem I am having is that the monitors will go to black and the machine has to be rebooted to get the world back running.  Looking in the event log, there are a number of events for ati2mtag with the red meatball.  The error is MODE:GXO Execute BIOS Table Error.  Have you seen this problem yet?  

    Also, I have 4 GB of memory installed but it seems that XP (Company requires us to run XP) and the system is only seeing 3GB.  Any ideas on how to recover the last GB?

  8. Keith Combs says:


    I have no idea on the docking station issue.  I don’t have a docking station.

    As for the memory question, you would need to be using a 64 bit version of Windows XP or one of our other operating systems to use 4 or more.

Comments are closed.

Skip to main content