More Exchange analyzer TLA’s*


* TLA = Three Letter Acronym


 


In September 2004, we released the Exchange Best Practices Analyzer (ExBPA).  We followed up on this success in November 2005 with the Performance Troubleshooter (ExPTA) and the Disaster Recovery Analyzer (ExDRA).  Over recent months we have been working on a new analyzer called the Mailflow Troubleshooter (ExMFA).  Looking at our overall tool set, we decided that rather than continue to ship these tools as entirely independent entities, we would unify most of them together under a single umbrella application.  This is how the Exchange Troubleshooting Assistant (ExTrA) was born. 


 


ExTrA is essentially a union of ExDRA, ExPTA, and the new ExMFA, with a few additional things thrown in.  ExBPA is not currently part of ExTrA.  While we may consider this in the future, the current thinking is that ExBPA is a more proactive tool to be run at any time, and the others are more reactive to be run in response to a particular problem occurring.  All of our analyzer/troubleshooter tools are built off of the same configuration-driven engine, so combining them together was actually a very simple process that did not require us to do any rewriting of the existing logic.  We have essentially just packaged them all together and added a single additional screen that allows you to choose which tool to launch.  This first screen has two sections: a set of symptom-based selections, and a set of related functionality selections.  The initial symptom-based selections will be for troubleshooting mailflow issues, performance issues, or database issues (such as storage mounting problems).  The related functionality will include things like trace control, message tracking search and disaster recovery management (some may be available only for Exchange 2007 servers, however). 


 


Over time, we will be adding to these selections, and creating deeper integration between the components (like ExBPA, ExTrA is configuration driven and will be updated on a regular - probably monthly - basis).  Initially, when you select, for example, performance troubleshooting, the experience from that point on will be exactly the same as if you had launched ExPTA independently.  We will eventually blur the lines a little bit to make them function more as a whole.  For instance, mailflow and performance troubleshoot overlap to some degree.  Both areas will eventually branch back to the same symptom/root cause branch when tracking down the same type of problem (i.e. slow mailflow).  Another example of this would be if you are troubleshooting a store mounting issue and it concluded a database corruption was the root cause, it would branch automatically over to disaster recovery management to allow you to begin that process seamlessly.


 


ExTrA is intended to eventually become the one-stop shop for all Exchange troubleshooting needs, and in turn it will get more heavily integrated into the Exchange product itself.  We are very excited about releasing this tool, and are committed to following through with it over the upcoming years in the same way we've done with ExBPA in the past. 


 


Now, a little more about the new mailflow troubleshooting functionality we're adding.   Like performance, mailflow is controlled by many interacting processes and settings, and when something is not working right discovering the root cause can be quite difficult and requires a good deal of product expertise to do.  The mailflow troubleshooter attempts to walk a user through the process by starting with a symptom and working towards root cause.  The initial set of symptoms we will deal with are:


 


·         Non-delivery reports (NDR's) are being received.


·         Mail from an external source is slow or blocked.


·         Mail to an external source is slow or blocked.


·         Mail queues are backing up.


 


For example, when a remote delivery queue is backing up, the mailflow troubleshooter analyzes DNS for incorrect configurations, checks network connectivity (e.g. black hole routers), throws a series of SMTP commands to remote hosts, diagnoses link state data and more to identify possible root causes. Similarly, different sets of troubleshooting steps are prepared to tackle each symptom.


 


Like the other troubleshooters, we will be adding more sophistication into the logic over time.  New symptoms will be added and more root causes will be automatically identified.  We have been beta testing this functionality within our support team, and the early results indicate that this will have as immediate and positive an impact as ExBPA and ExPTA have had.


 


ExDRA has not yet enjoyed the same kind of success as the other analyzer/troubleshooter tools have had, largely due to the nature of the area it is addressing: disaster recovery.  We are investing quite a bit of effort in this area, however, particularly for Exchange 2007.  Most of the top Exchange disaster recovery experts at Microsoft are involved in the design and development of this tool.  We think the expanded feature set will make this as useful as any of the other tools we have.  A couple of examples of new functionality are steps to reset the log generation number, and a set of database repair steps that includes running defrag and isinteg to get the database consistent again.  We are also branching out some functionality from this area to do more symptom based analysis, such as identifying root causes of store mounting problems.  We are particularly eager to hear from anyone who has experience using this tool and are looking for feedback - both positive and negative - on its effectiveness and what we can do to make it even more useful.  If you have such feedback to give, please post a reply to this entry or to our newsgroup at microsoft.public.exchange.tools. 


 


ExPTA development continues apace as well.  We are adding more and more sophistication in this area, and this will continue for both the Exchange 2003 scenarios and the new Exchange 2007 scenarios.


 


There are no major new features coming up in the next release of ExBPA; just more rules, but the next release is going to be fully localized, (for ExBPA only - the other tools will be localized when Exchange 2007 releases).  Another thing that is going to be new when Exchange 2007 Beta 2 hits the streets is a new 'Exchange 2007 Readiness Check' scan type. You can run this against your existing Exchange 2000/2003 deployment to find out if there are any changes or decisions that need to be made before Exchange 2007 is introduced. This will allow you to plan for, and implement changes well-ahead of time, giving you a gentle glide-path to deploying Exchange 2007


 


All of the new functionality discussed here is expected to be released this summer.  It should also be a part of the toolbox in Exchange 2007 and available directly from the Exchange Management Console.  As I hope is apparent, we are devoting quite a large number of resources into the area of operational support tools here in Exchange, and we hope everyone who uses Exchange is happy with the progress we've made over the past couple of years, and we look forward to continuing this effort.  We've gotten a lot of positive feedback on these tools, and that makes it all worthwhile.  Thanks for the support.


 


- Jon Avner

Comments (13)
  1. are these going to work in any timezone, with any language or MUST these be run with US English set?

  2. Jon Avner says:

    The initial release will be US English only, but we are expecting to have them localized in the release after that.

  3. Richard Sperry says:

    i needed this laugh this morning

  4. Mark Beaupre says:

    Any plans on opening this tool up to third party ISVs who may want to create "ExTRA" plug-ins so that they can take advantage of a common interface when conducting performance analysis/troubleshooting software that hooks into exchange at various levels [Storage Management, SAP Connectors, Fax Connectors, Unified Messagaing, AntiVirus, etc.]?

  5. Joel Stidley says:

    You are taking all of the fun out of Exchange support!  

    With all of these tools anyone is going to be able to install, run and troubleshoot Exchange. :)

  6. Jon Avner says:

    There are no current plans to open up ExTRA to allow 3rd parties to plug in their own functionality.  There are some strategic efforts going on in MS to allow for this kind of functionality, but those are longer term projects.

    With ExBPA, we do already work with several vendors, such as virus scanners, to get their validation rules incorporated into the configuration file we publish.  We could do something similar with ExTRA, but as I said we are not currently planning anything like that.

    It’s an interesting suggestion, though.  Thanks.

  7. Nathan WInters says:

    Hi,

    These tools are brilliant and really make life easier for an Exchange admin.

    Although this is obviously not directly your area, maybe you can shed some light on something for me…

    … Are other MS people working on these types of tools? For example what about an Active Directory BPA? That would surely be hugely useful! Or similar tools for SQL etc.

    Thanks and keep up the good work!

    Cheers

    Nathan

  8. Gary Smith says:

    Hi,

    The ExMFA looks interesting. Will it offer SMTP mail round trip testing in the way the old 5.5 Link Monitor did ?

    I used to find this really useful for seeing if there was a delay with sendingreceiving external mail, and I can’t find a replacement in 2003, unless I am missing something obvious !!

    Thanks

    Gary

  9. Tipsmark says:

    Where do I get these programs? I cannot find ExMFA or ExTrA…

    Thanks

    /Rune

  10. Jon Avner says:

    Thanks for the kind remarks.  Several product teams are in the process of developing BPA’s of their own, and a few have already shipped.  The underlying framework for ExBPA was built in such a way that other products can take advantage of it.  SQL already has a BPA although its built on a different technology than ours (they are currently working on SQL BPA v2, and that version will be based on our technology).  ISA and BizTalk have also shipped BPA’s using this.  Perhaps half a dozen other products (mainly server applications) are in progress on BPA development.

    The notion of an AD BPA has come up several times, but I have not heard of any specific work being done in that area yet.  

    Our troubleshooter framework is similarly capable of working with other MS products, but we have not yet made it available to anyone outside Exchange (we may do so at some point, but I have no firm timeline for that).

  11. Haruya Shida says:

    Re: Link Monitor in Gary’s comment above

    There are no current plans that ExMFA will offer exactly the same functions as Link Monitor had. However, with ExMFA, you can send a test message from a server to a mailbox on a remote server (you can specify these) and immediately verify that the message has been delivered successfully. Even better, if it finds that the message has not been delivered, it starts troubleshooting automatically.

  12. Gary Smith says:

    Haruya,

    Thanks for that – it certainly sounds like a step in the right direction.

    Looking forward to this when it’s released.

    Thanks

    Gary

  13. Jon Avner says:

    ExTRA is not released yet.  It will be released along with Exchange 2007 beta2, and we’ll also put it on the tools download site around that time for use with down-level servers (not sure if it will be simultaneous or a little later).

    ExMFA is not a separate executable, although it started out that way.  It’s now just the name for mailflow troubleshooting functionality found within ExTRA.

Comments are closed.

Skip to main content